Відео

Nice job, when you doing the rotary table?🙂

i have a m300 lathe and ive learnt soooo muchhhh from this video

This looks very similar to a coal burning stove I just acquired that I am going to try to use for wood. Not sure if anyone has done this before but it looks just like this one.

Nice build. I am currently building one, different design. Did you have to isolate the motor from the unit for welding?

That was silly, not using cutting fluid on the centre drill...60,° can also be UNF and UNC.....I specialised in screwcutting

For heavens sake man, I watched all of your handy work....and then NO proof of how well the muffler worked, I'm very let down to say the least. I hope it was what you wanted. All of the bike muffler build guys start their bikes at the end.... Re-Edit please.

Fantastic job. that was a excellent video. Im going to save this, so if or when I need to make one I will copy yours. Also if you don't mind, give your fur baby some extra love. LOL

tricheur

I have 2 moters 15KW & 3KW .. all 3 phase .. which do you think is better to use in my case .. VFD or RPC ?

The best part is how you plumbed it all up with that drain valve. Genius.

I'm glad that you mentioned the depth of cut, is 0.25mm good for all diameters/sizes of thread? How many advancements of 0.25 mm do you make, until you reach max depth? What's the maximum sticking out on the insert tool I guess? You can't cut any deeper than that.

I bought a 5hp vfd to run a 5hp wye wound blower motor. I went to hook it up but the instructions say to rewire the wye into delta. Problem is, its a 9 lead motor with the 3 internal leads permanently connected. Why does it need to be in a delta configuration?

If the VFD has intermediate step where it converts AC to DC( then it should be possible to run it strictly off DC? This would allow the three phase motor to be used with battery power in a vehicle.

What is the original tank and the propane tanks rated to?

Very nice work. That rack is something I need as well

I like how this is the pneumatic equivalent of adding a capacitor to the circuit. Great stuff! 🫡🙂

This was all well and handy until you used a lathe not many have that mate!

running, That's like watching a good movie at right at the end they come on and say " you decide how it ends" not providing the muffler you made with the car running OMG?? how lame

Hey thank you for making a muffler built like a silencers save me alot of time I like your very first muffler steal wall packet

Hope everyone is learning as much as I have from this. In a gunsmithing course right now. Helped out a lot. Take it easy my "Niggels" 😂😂

Good Job

Great!

Can you share your diagram,, i want to build one

Excellent Boston, MA 👍

Metal and concrete, ok. But seriously there's way safer ways to cut wood

I wonder why PRC is compared to VFD, if you have a PRC, you have a sufficient amount of electric to power your tools, while VFD is just a control for a motor.

Ekine saglik harika bir video olmuş

Better to thread from left to right, almost no chance of crashing the tool.

What model is this stove wood burner ? How is it's call?

Im repairing a crack on a drill press body where the pillar inserts and a grub screw holds it. A weak point that has cracked when a lot of force has been applied on the press in the past. I don't have a welder and had planned to use a pipe strap/clamp but also have JB Weld and may use a section of the pipe clamp with the epoxy instead to create a stronger outcome without the slight stretch a screw tightened clamp has.

great work, well prepared and scientific thinking , gave me an idea for cast piece on engine block ive broke off from overtightening ! which is on stage one at mo with epoxy only ..so far so good ....

Time for a video???

Looks impressive.. Thank you for posting

Brilliant video & well explained to detail . I have a spare 88 litre / 45 kg gas bottle I've been wanting to use for the same purpose . Would be great if end of video had a parts list , listing pipe grade ...& size , compression fittings types , gate Valve type , flux used & thread sizes etc . Great video mate & thank you .

Are you an electrician?

Good information!

Amazing video, really loved it!

You can add a drill chuck to it and the possibilities become manifold 😮

Not sure why I'm watching this now, I don't even own a lathe yet lol. But maybe some of this info will stick for when I need it, thanks!

Not sure why I'm watching this now, I don't even own a lathe yet lol. But maybe some of this info will stick for when I need it, thanks!

When you get back to "start" does the Z axis have to be the same ???

its nice to watch a youtube video with just the work and not the usual look at me show.

I was going to watch this until I saw "downstreem" on the whiteboard.

👍👍🤲🙏💯💯🤌🤌 thank you

I enjoyed watching you polish your pipe.

I have a couple of knackered tanks I'm looking to stack as auxiliary the only concern with this design is that any moisture In the tank that hasn't been blown out will get blasted straight up to whatever tools you're using, even a water trap would struggle to handle that,

Buen trabajo, gracias por compartir tus conocimientos Estoy automatizando una fresadora , que se podría implantar en un torno, en mi canal estoy subiendo la información

this is a good video showing air tank to compressor add on.but not needed in today's world when all the things he made are cheaper and less trouble to make.for instance the nipple end can be found on any bbq set lots are put on curb and thrown away.also cheap at any hardware store.might be good knowledge to have if SHTF but whole cheaper now and less work.and the stand could be better with it upright and a petcock installed on bottom at 150"something no danger of blowout putting one in. something as simple as a tubeless tire stem just to bleed off condensation.easily installed. good job but lots of wasted effort.

I have the same lathe. Can I use my carriage stop to cut the exact length of thread I need?

But where did you get/what is that plastic pad you used? Cheers.